FC72-氮气混合气体流动冷凝效率研究

混合气体（可凝蒸气与不可凝气体）相对于纯可凝蒸气,其流动冷凝过程更为复杂,冷凝效率受不可凝气体的浓度及冷凝温度影响.为对空间任务蒸发冷凝实验平台排放的废气FC72进行清理回收,针对所研制的FC72气液分离与收集器,在地面环境下对不同浓度的混合气体在不同冷凝温度下进行了流动冷凝效率实验.结果表明,对于FC72与氮气的混合气体,当冷凝器温度一定时,随着FC72浓度的增加,该气液分离与收集器的冷凝效率提高.在冷凝器温度约为-10℃,FC72浓度高于70%时,流动冷凝效率达到80%以上;当冷凝器温度降低至约-13℃,FC72浓度高于30%时,流动冷凝效率达到70%以上;当冷凝器温度降至约-15℃,FC72浓度高于20%时,流动冷凝速率均达到60%以上.      

Performability analysis of avionics system with multilayer HM/FM using stochastic Petri nets

The integrated modular avionics (IMA) architecture is an open standard in avionics industry, in which the number of functionalities implemented by software is greater than ever before. In the IMA architecture, the reliability of the avionics system is highly affected by the software applications. In order to enhance the fault tolerance feature with regard to software application failures, many industrial standards propose a layered health monitoring/fault management (HM/FM) scheme to periodically check the health status of software application processes and recover the malfunctioning software process whenever an error is located. In this paper, we make an analytical study of the HM/FM system for avionics application software. We use the stochastic Petri nets (SPN) to build a formal model of each component and present a method to combine the components together to form a complete system model with respect to three interlayer query strategies. We further investigate the effectiveness of these strategies in an illustrative system.     

复合材料与金属胶接结构的次弯曲效应研究

复合材料与金属胶接单搭接的次弯曲效应引起的剥离应力,会大大降低接头的强度。采用有限元方法分析复合材料铺向角、铺层顺序及斜削对次弯曲的影响,并进一步研究分析次弯曲和胶层剥离应力、板的弯曲刚度之间的关系。结果表明：次弯曲影响剥离应力的大小;弯曲刚度越大,次弯曲越小;斜削有助于减小次弯曲。     

大型飞机机动载荷减缓控制系统设计与仿真

为了有效降低飞机机翼根部弯矩和减轻结构重量,针对我国大型飞机中的机动载荷减缓控制系统进行了设计与仿真分析验证,根据实际飞机结构特点提出了一种传感器布局方案,建立了升降舵、副翼、扰流片等独立偏转的仿真分析模型,在常规控制律的基础上,基于控制分配方法进行直接升力控制,仿真结果表明：所设计的系统能够实现机动载荷的减缓,并使得...     

多源图像融合技术的发展与军事应用研究

多源图像融合能根据各波段传感器获得信息的互补性和冗余性,综合多个传感器的信息,获取对同一目标或场景全面而详尽的表述,从而得出更为准确、可靠的结论.首先分析了多源图像融合的主要研究内容,进而探讨了发展现状和存在的问题,在此基础上,总结了图像融合中常用的传感器和应用方向.     

扩频测控系统干扰容限的分析

扩频测控系统以其诸多优点正成为卫星测控的主流体制,经典分析给出扩频系统的干扰容限只是一个宽泛的界。在同时考虑输入信号强度、多址干扰等因素的情况下,对扩频测控系统的干扰容限上界进行分析推导,得出更符合实际情况的干扰容限上界的闭式表达,通过计算给出干扰容限与多址干扰、干扰容限与输入信噪比强度的关系。     

Investigation on Thermal and Dimensional Stability of Epoxy Resin In-Situ Modified by Cyanate Ester Resin and Polydimethylsiloxane

The thermal and dimensional stability of epoxy resin (EP) in-situ modified by cyanate ester (CE) and polydimethylsiloxane (PDMS) are investigated by means of experiments and numerical simulation. Thermal gravimetric analysis (TGA) and differential scanning calorimeter (DSC) are used to analyze the heat resistance of the modified EP. The dimensional stability is characterized by the volume shrinkage of the series PDMS/CE/EP obtained by the density method. The chemical structure of the PDMS/CE/EP is analyzed by Fourier transform infrared spectroscopy (FTIR). The results of TGA and DSC indicate that the thermal stability of PDMS/CE/EP decreases firstly and then increases with the increase in the amount of CE. The addition of PDMS shows a slight effect on the thermal stability. The 40% CE makes the blending system exhibit the lowest initial decomposition temperature, which reduces by 15.5% and 40.8% compared with pure EP and CE, respectively. The FTIR results suggested that the influence of CE on the thermal stability of the modified EP is mainly ascribed to the generation of oxazolidinone ring with low thermal stability and the increase in the triazine ring with high thermal stability. The volume shrinkage measurement results show that the introduction of CE and PDMS are both beneficial to the improvement of the dimensional stability of the blending systems. The in-situ addition of 80% CE shows the lowest volume shrinkage of 6.11%. The thermal stress distribution of PDMS/CE/EP generated during the solidification process is simulated by the finite element analysis. The results suggested that the introduction of 80% CE into EP results in the lowest thermal stress in the blending system, which indicates that the system has the lowest volume shrinkage, which agrees well with the experimental results.     

一种基于李群方法的新型三维制导律设计

使用李群方法设计了一种新型三维制导律。在俯仰、偏航通道之间存在强耦合关系时,基于双通道解耦的假设构造三维制导律变得困难,而基于李群方法则可以在不进行通道解耦的条件下进行制导律设计。本文首先基于矢量建立了三维制导的一般运动学模型,在给出了矢量的SO(3)群描述之后,按照SO(3)群上的广义比例 微分(PD)控制方式进行了制导律设计。所得到的三维制导律既能用于目标机动的制导,也能用于有终端约束的制导。该制导律在二维平面的简化结果与传统比例导引的结果一致。最后用典型飞行轨迹仿真验证了其可行性和良好的性能。     

伪单脉冲跟踪在“动中通”中的应用

文章根据车栽“动中通”在卫星通信中的特点,针对该车栽站在移动过程中天线偏离卫星的情况,研究了特殊的伪单脉冲跟踪体制。介绍了伪单脉冲自跟踪的原理、系统组成以及系统的具体实现方案。伪单脉冲跟踪系统结构简单、跟踪精度高,可以代替单脉冲跟踪应用到车载“动中通”中,简化了系统的复杂性并降低了成本。     

多曲面岛屿五轴螺旋刀位轨迹规划

针对复杂拓扑关系的多曲面岛屿加工,以叶片阻尼台为研究对象,提出基于清根刀心轨迹的五轴球头刀螺旋刀位轨迹生成算法。首先建立局部坐标系,定义并确定中轴线,然后按层逐点创建投影射线,利用实体求交构造初始刀心螺旋轨迹;通过变步长迭代算法修正,使得刀心点距实体最短距离在加工精度范围内等于刀具半径。最后根据实体结构控制刀轴矢量,规划出无干涉的螺旋刀位轨迹。算例表明,本文算法统一了阻尼台加工与清根加工,避免了复杂偏置曲面片的构造,保证在加工过程中没有冗余进退刀的同时刀具不会过切叶身曲面,实现了阻尼台多曲面岛屿五轴球头刀高效精密加工。